高线电压小功率经过多次实验发现仪（耐弧光经过多次实验发现仪）-（来服务器操纵）

High voltage low current tester (arc resistance tester) - (computer control)

產产品标题：耐电弧试验机

Product name: electric arc resistance tester

品牌规格型号：NDH-A

Product model: NDH - A

做到基准：GB/T 1411-2002《混合物绝缘电阻装修材料耐高放低直流电电孤蓄电池放电的耐压》（等一起IEC  61621-1997）及ASTM D495等标的规范设定手工制造的，并合乎IEC 149、UL 746A等耐压形式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

常见支持领域及模块：

本应力检验机是决定选用作电机的、设备和家庭型设备等服务行业的电工作业用氟塑料件、聚酯硅胶粘合剂胶和电隔热电阻漆等电隔热电阻涂料的耐弧光稳定性评定标准，主用作胶体电隔热电阻涂料如：氟塑料件、塑料膜、聚酯硅胶粘合剂、白云母、工业陶瓷、玻离、电隔热电阻油、电隔热电阻漆、纸壳等媒质的耐弧光稳定性检验；

本检测机由运算机操作运转，能够 表现目前科学实验报告性操作状况及科学实验报告性操作周期，科学实验报告性操作停止后并同步保存目前科学实验报告性操作信息，并可彩印.标淮试验评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为两排一体式形式，下面为实际网络协议软件，上端为耐压环境试验箱。

2 本设备适用*新智力抑制技术应用，按照抉择小程序（IEC或ASTM）可系统自动通过做实验的时候，并在笔记本上显视耐压步骤和没想到。

3 **使用性能稳定，抗干涉实力强，各种测试精确高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断日子出现偏差的原因：少于 ±10ms

2 调压器功率：2kVA

3 额定值检测线电压：12.5kV

4 做实验的时候的电压精确：±3%

5 电流量操控精确度：±10%  感应电流衡量精准度：1.5%

6 电级对试板工作压力：（0.5±0.05）N

7 电极片资料：钨棒

8 金属电极距离感：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 实用场景温差：（23±2）℃

10 动用场景绝对湿度：（50±5）%

11 电原：220V±5%  50Hz  10A

12 经过多次实验发现    手段：   国家标准/美标/10 mA 陆续/20 mA 间断/30 mA不断/40 mA连续性

13 耐压执行程序如下所述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物料规格型号：

NDH-A    耐电孤应力测试仪-微机掌握

NDH-B    耐焊弧校正仪-手触屏掌控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！